Hi guy's very happy to announce my first parts list. The list is not yet complete and will be updated as and when the car becomes dismantled Breaking will commence next weds/thurs

Prices as follows

bodywork and interior:

chargespeed lower bumper/splitter complete with front bumper £110
front wings £45 pair
standard facelift bonnet with scoop and vents £70
door cards, rear seats £40
clear/crystal side repeaters £15
momo steering wheel inc airbag £30
clear sidelights £20
boot lid + 4x doors with glass, motors etc £150
hid headlight kit dipped and main £30 SOLD
full crystal clear headlights lights £100
sti rear lights £120
sti v spoiler £200
charge speed front lip £70
piaa front fog/driving lights with PIAA dash switch £100
defi gauges (boost, oil p, oil t, water t, fuel p, control box) £500 SOLD
sti clocks (with mph converter, mot and service history show the milage) £70
genuine p1 OZ 18" alloys with brand new vredestein high performance tyres £650
MINT front STI 5 seats £225
all other interior exterior parts available pls ask

engine and components, long engine components to be priced after testing
a/con
walbro fuel pump £30
modified pennine subaru oil pump
pennine subaru fuel rail
arp headstuds
steal head gaskets
semi closed deck 2.5 ltr reinforced by pennine subaru
forged cro-molly conrods
skimmed heads recut valve seats 3 angle
bored and honed block
lateral performance pistons etc
lateral performance inlet and out let valves kit (can raise the rpm higher
reworked camshafts
coolant plugs etc
Gems ecu (allows dual mapping and anti lag launch control etc) £350

aps intercooler pipes and front front mount
3 port boost solenoid
ppg uprated syncro gearbox
tubular exhaust manifold slip jointed and wrapped £350
Virtually brand new scoobyclinic uprated organic clutch documented 1 month old £200 PROVISIONALLY SOLD
aps front mount intercooler including all pipework £400
740cc injectors £200 SOLD
aeromotive fpr
Milltek decat exhaust 3" turbo back downpipe wrapped £325
md321v turbo + large 3" turbo inlet pipe+ braided feeds £900
stainless steel slam panel £20 PROVISIONALLY SOLD
SFS top and bottom silicone rad hoses £25
Forge VTA dump valve £50
3-portboost solenoid £15
PPG Straight cut gearset in TY54 box £1,500
AP 330mm 6pot brakes with bells/ new rotors and pads £1000 PROVISIONALLY SOLD
Goodridge front braided brake lines £25

suspension
white line anti lift kit
" rear droplinks £50 PROVISIONALLY SOLD
" front droplinks £50 PROVISIONALLY SOLD
rear adj sway bar £80 PROVISIONALLY SOLD
front anti roll bar £80 PROVISIONALLY SOLD
white line front strut brace £60

30K of receipt for engine, gearbox build work

PLENTY MORE TO BE LISTED YET, UPDATES AS THE PARTS ARE REMOVED

ANY QUESTIONS PLEASE ASK FOR THOSE THAT ARE ON FB 36 PHOTOS OF THE CAR HAVE BEEN UPLOADED TO

https://www.facebook.com/HaynesPerformanceBreakers

NICE...... enjoy

He is breaking it Kap

i hope to enjoy the money Kap, i hope you enjoy the parts

congrats mark happy breaking

Got any pic's of the defi's please mark.
And are they the older type defi control box or newer type ?

Hi Gaz, i am picking the car up in a day or two bank holiday permitting but these are the photos available now




£500 for the whole whole package inc all wiring, dash controller, under bonnet harness and all senders etc

Give us a shout when the car's in please mark and i'll pop over and have a look

If gaz dosent have the gauges im interested in the oil temp, water temp and fuel pressure

Hi Doug, will be willing to split if not sold as a complete package.

They are all the Stepper type if anyone was unsure

Gaz i will call you when the car has arrived.

I would be interested in the fuel rails depending on compatabilty with my car. Looking to go parallel on mine and maybe a deal with Wayne on the injectors would make sense. I know he was looking for some 740's for me as the ones I bought from Jay are fitted in his car!

iam after a drivers side window bronze tint from an import how much if you got one cheers

Hi Tim, once the car is in stock we can check compatibility of the rails m8 and best you chat with the ferret re injectors

On another note i may have a six speed available 2002 sti prodrive 80,000k box, propshaft linkage and cradle and poss gear stick. No whines leaks etc £1,200

Hi Reg, i will let you know when i have something suitable in stock.

Cheers Mark

marky777 wrote:

Hi Tim, once the car is in stock we can check compatibility of the rails m8 and best you chat with the ferret re injectors

On another note i may have a six speed available 2002 sti prodrive 80,000k box, propshaft linkage and cradle and poss gear stick. No whines leaks etc £1,200

Are you getting the whole car? Clutch, starter, front stub axels (whatever the f**k they are ) and rear diff are required for a conversion on mine - so would be interested in a package price Marky

Tim, this one is not a complete package m8 hence price. I will be able to supply the complete conversion as soon as i purchase the next vehicle with all parts coming from the same car as it will most likely be a newage sti prodrive. For the complete package inc clutch we would be talking £1,700 bud

how much for the following?

walbro fuel pump
whiteline anti lift kit
all drop links (are these the solid alloy ones?)
front mount intercooler
hid headlights

oh and a price for the tubby

The turbo isnt really suitable for a 2.0 Luke

oh ok, just the other parts then

Jay is right Luke, it is suitable for 2.0ltrs but only really on very highly tuned cars.....

http://lateralperformance.co.uk/product.php/150/76/md321v__500bhp______________________special_price_________________________

Regards to the other parts, i am collecting the car on saturday so will check all the whiteline parts and condition then price them for you. You are first in line for all the parts you requested

ok thank you

Thought i would stick up a photo of the exterior taken at Nurburgring last weekend

A full price list will be put up on Monday after the car is in the workshop

Timmy2Stroke wrote:

I would be interested in the fuel rails depending on compatabilty with my car. Looking to go parallel on mine and maybe a deal with Wayne on the injectors would make sense. I know he was looking for some 740's for me as the ones I bought from Jay are fitted in his car!

Don't panic 2 stroke, my name was on them before mark put the car up And I'm led to believe that you can use a 5 speed clutch and flywheel with a six speed box ,but not the other way around!

scuuby wrote:

Timmy2Stroke wrote:

I would be interested in the fuel rails depending on compatabilty with my car. Looking to go parallel on mine and maybe a deal with Wayne on the injectors would make sense. I know he was looking for some 740's for me as the ones I bought from Jay are fitted in his car!

Don't panic 2 stroke, my name was on them before mark put the car up And I'm led to believe that you can use a 5 speed clutch and flywheel with a six speed box ,but not the other way around!

Not panicking bud just spotted an opportunity.

I have heard the 5 speed / flywheel will work providing you have the right starter motor. Some 5 speed starters are compatible but others aren't.

I think I would need a rear diff but I'll have to look into what mine actually is. I think you need a 3.9 with the 6 speed.

UK 6 speed uses a 3.54 rear diff and a JDM 6speed uses a 3.9

marky777 wrote:

They are all the Stepper type if anyone was unsure

Gaz i will call you when the car has arrived.

You have pm re tel number

Timmy2Stroke wrote:

scuuby wrote:

Timmy2Stroke wrote:

I would be interested in the fuel rails depending on compatabilty with my car. Looking to go parallel on mine and maybe a deal with Wayne on the injectors would make sense. I know he was looking for some 740's for me as the ones I bought from Jay are fitted in his car!

Don't panic 2 stroke, my name was on them before mark put the car up And I'm led to believe that you can use a 5 speed clutch and flywheel with a six speed box ,but not the other way around!

Not panicking bud just spotted an opportunity.

I have heard the 5 speed / flywheel will work providing you have the right starter motor. Some 5 speed starters are compatible but others aren't.

I think I would need a rear diff but I'll have to look into what mine actually is. I think you need a 3.9 with the 6 speed.

lol its the auto starters u can use