Making some AN6 fuel rail end adaptors up for Stevey fuel rails at the moment. These bolt directly to ends of fuel rail.

Making some extra sets if any one is interested. Forum price will be £40 for set of four anodised and delivered.

Kev

[You must be registered and logged in to see this image.]

Looking good

what about where the fuel/p/reg fits ,is one a differnt fitting or do you just use a second lefthand fuel rail on righthand side of engine ?? like i have on mine

RA_bly_ wrote:

what about where the fuel/p/reg fits ,is one a differnt fitting or do you just use a second lefthand fuel rail on righthand side of engine ?? like i have on mine

I only had one rail to work with. If the fuel pressure reg is attached to the end of r/h rail then yes 2 l/h rails will be needed.

I have got this sorted now.

These are in three kit versions as follows:-

Kit A: 4 off -AN6 with 8mm hole (2 R/H fuel rails needed).

Kit B: 3 off -AN6 with 8mm hole, 1 off -AN6 for FPR replacement with 6mm hole (for in series fuel lines).

Kit C: 2 off -AN6 with 8mm hole, 1 off AN6 with 6mm hole, 1 off -AN6 for FPR replacement 6mm hole (for parallel fuel lines).

Can someone confirm which models use these fuel rails as wish to advertise these on EBay.

[You must be registered and logged in to see this image.]